Fc engineered anti-virus therapeutic human IgG1 expressed in plants with altered binding to the neonatal Fc receptor.

Production of therapeutic monoclonal antibody (mAb) in transgenic plants has several advantages such as large-scale production and the absence of pathogenic animal contaminants. However, mAb with high mannose (HM) type glycans has shown a faster clearance compared to antibodies produced in animal cells. The neonatal Fc receptor (FcRn) regulates the persistence of immunoglobulin G (IgG) by the FcRn-mediated recycling pathway, which salvages IgG from lysosomal degradation within cells. In this study, Fc-engineering of antirabies virus therapeutic mAb SO57 with the endoplasmic reticulum (ER)-retention peptide signal (Lys-Asp-Glu-Leu; KDEL) (mAbpK SO57) in plant cell was conducted to enhance its binding activity to human neonatal Fc receptor (hFcRn), consequently improve its serum half-life. Enzyme-linked immunosorbent assay (ELISA) and Surface plasmon resonance assay showed altered binding affinity of the Fc region of three different mAbpK SO57 variants [M252Y/S254T/T256E (MST), M428L/N434S (MN), H433K/N434F (HN)] to hFcRn compared to wild type (WT) of mAbpK SO57. Molecular modeling data visualized the structural alterations in these mAbpK SO57. All of the mAbpK SO57 variants had HM type glycan structures similar to the WT mAbpK SO57. In addition, the neutralizing activity of the three variants against the rabies virus CVS-11 was effective as the WT mAbpK SO57. These results indicate that the binding affinity of mAbpK SO57 variants to hFcRn can be modified without alteration of N-glycan structure and neutralization activity. Taken together, this study suggests that Fc-engineering of antirabies virus mAb can be applied to enhance the efficacy of therapeutic mAbs in plant expression systems.

Ortho-Carborane Decorated Multi-Resonance TADF Emitters: Preserving Local Excited State and High Efficiency in OLEDs.

A novel class of o-carboranyl luminophores, 2CB-BuDABNA (1) and 3CB-BuDABNA (2) is reported, in which o-carborane moieties are incorporated at the periphery of the B,N-doped multi-resonance thermally activated delayed fluorescence (MR-TADF) core. Both compounds maintain the inherent local emission characteristics of their MR-emitting core, exhibiting intense MR-TADF with high photoluminescence quantum yields in toluene and rigid states. In contrast, the presence of the dark lowest-energy charge transfer state, induced by cage rotation in THF, is suggested to be responsible for emission quenching in a polar solvent. Despite the different arrangement of the cage on the DABNA core, both 1 and 2 show red-shifted emissions compared to the parent compound BuDABNA (3). By utilizing 1 as the emitter, high-efficiency blue organic light-emitting diodes (OLEDs) are achieved with a remarkable maximum external quantum efficiency of 25%, representing the highest reported efficiency for OLEDs employing an o-carboranyl luminophore as the emitter.

Machine learning approach for carbon disclosure in the Korean market: The role of environmental performance.

Over the past few decades, scholars have employed a wide range of methodologies to determine the factors influencing firms' voluntary carbon disclosure. Most of these studies have been conducted in advanced markets. This article aims to examine the trend of voluntary carbon disclosure in the Korean financial market by utilizing machine learning models such as Random Forest and Gradient Boosted Decision Tree. Based on a set of hand-collected carbon disclosure data, we initially demonstrated significantly better performance of machine learning models compared to the traditional logistic model. Regarding the factors influencing disclosure, we consistently find the importance of environmental scores, emphasizing the role of the emerging mega-trend of ESG management practices in disclosure decisions. However, in contrast to recent studies, we do not find that the unique Korean governance structure, chaebol, has any significantly different implications in terms of prediction performance and variable importance in carbon disclosure decisions.

Formation techniques for upper active channel in monolithic 3D integration: an overview.

The concept of three-dimensional stacking of device layers has attracted significant attention with the increasing difficulty in scaling down devices. Monolithic 3D (M3D) integration provides a notable benefit in achieving a higher connection density between upper and lower device layers than through-via-silicon. Nevertheless, the practical implementation of M3D integration into commercial production faces several technological challenges. Developing an upper active channel layer for device fabrication is the primary challenge in M3D integration. The difficulty arises from the thermal budget limitation for the upper channel process because a high thermal budget process may degrade the device layers below. This paper provides an overview of the potential technologies for forming active channel layers in the upper device layers of M3D integration, particularly for complementary metal-oxide-semiconductor devices and digital circuits. Techniques are for polysilicon, single crystal silicon, and alternative channels, which can solve the temperature issue for the top layer process.

Visible-Light Communication with Lighting: RGB Wavelength Division Multiplexing OLEDs/OPDs Platform.

A multichannel/multicolor visible light communication (VLC) system using entirely organic components, including organic light emitting diodes (OLEDs) and organic photodiodes (OPDs), is developed to demonstrate indoor lighting applications where the integration of OLEDs and OPDs has significant potential. To achieve this, tricolor (Red/Green/Blue(R/G/B))-selective OPD arrays for the receiver and tricolor OLED arrays for the emitter are developed. For (R/G/B)-selective OPDs, a Fabry-Pérot electrode to enhance color selectivity and a thick junction structure to effectively accommodate a wide range of driving voltages are introduced. For tricolor OLEDs, fluorescent-emitting materials are used to enhance the operating frequency in addition to introducing a cavity structure to achieve narrow emission. Utilizing these spectrally refined tricolor OPDs/OLEDs, a VLC system is designed for indoor lighting applications, and a systematic analysis of their signal-to-interference ratio dependence on the distance or angle between the transmitter and receiver is performed. The study's findings indicate the importance of emission angle-dependent wavelength shift of the OLED and the luminosity function, which varies with wavelength, in the R/G/B mixed-white-light-based VLC systems. Finally, the feasibility of VLC using tricolor OPDs/OLEDs in the real-life context of indoor white-color lighting is demonstrated, showing that the transmitted data patterns well-matched the received data patterns.

Changes in Lower Extremity Muscle Quantity and Quality in Patients with Subacute Stroke.

OBJECTIVE: To analyze the changes in muscle mass and quality with time on the paretic and non-paretic sides in subacute stroke patients and identify correlations between the variation of muscle mass and quality and lower limb functions. METHODS: Thirty hemiplegia patients diagnosed with stroke participated in this study. To evaluate poststroke muscle changes, longitudinal measurement of muscle mass and quality was conducted with bilateral lower limbs. The elastic shear modulus was measured using shear wave elastography and muscle thickness (MT) of rectus femoris, vastus intermedius, vastus lateralis (VL), vastus medialis, tibialis anterior, and gastrocnemius (GCM) muscles. Functional evaluation was performed using Berg Balance Scale (BBS), Five Times Sit to Stand Test (FTSST). Follow-up was performed at discharge. The muscle mass and quality were compared according to time. We analyzed whether muscle quantity and quality were related to function. RESULTS: MT demonstrated no significant change with time. The elastic shear modulus increased significantly in the paretic VL and GCM muscles and did not change significantly in the muscles on the non-paretic side. Correlation analysis detected that elastic shear modulus in the VL has a cross-sectional negative relationship between BBS and positive relationship between FTSST. There were significant correlation between variation of FTSST and the variation of the elastic shear modulus in VL. CONCLUSION: Only paretic VL and GCM muscle quality changed in subacute stroke patients and muscle's property related to lower limb functions. Therefore, the lower extremity requires an approach to muscle quality rather than quantity for subacute stroke patients.

The potential role of formononetin in cancer treatment: An updated review.

Currently, cancer is one of the main research topics, due to its high incidence and drug resistance to existing anti-cancer drugs. Formononetin, a natural product with phytoestrogenic properties and diverse biological functions, has attracted the attention of researchers working on anticancer drugs. Formononetin emerges as an intriguing bioactive substance compared to other isoflavones as it exhibits potent chemotherapeutic activity with less toxicity. Formononetin effectively plays a significant role in inhibiting cell proliferation, invasion, and metastatic abilities of cancer cells by targeting major signaling pathways at the junction of interconnected pathways. It also induces apoptosis and cell cycle arrest by modulating mediator proteins. It causes upregulation of key factors such as p-AKT, p38, p21, and p53 and downregulation of NF-κB. Furthermore, formononetin regulates the neoplastic microenvironment by inactivating the ERK1/2 pathway and lamin A/C signaling and has been reported to inactivate JAK/STAT, PKB or AKT, and mitogen-activated protein kinase pathways and to suppress cell migration, invasion, and angiogenesis in human cancer cells. To assist researchers in further exploring formononetin as a potential anticancer therapeutic candidate, this review focuses on both in vitro and in vivo proof of concept studies, patents, and clinical trials pertinent to formononetin's anticancer properties. Overall, this review discusses formononetin from a comprehensive perspective to highlight its potential benefits as an anticancer agent.

Effectiveness of antidepressant repetitive transcranial magnetic stimulation in a patient with refractory psychogenic dysphagia: A case report and review of literature.

BACKGROUND: Dysphagia is a common condition in older as well as young patients, and a variety of treatments have been reported depending on the cause. However, clinicians are challenged when the cause is unclear. This is the case with psychogenic dysphagia, which has typically been treated with supportive psychotherapy, medication, swallowing exercise, and dysphagia rehabilitation therapy. Here, we aimed to relieve the symptoms of a patient with refractory psychogenic dysphagia, who was unresponsive to conventional swallowing therapy, with repetitive transcranial magnetic stimulation (rTMS). CASE SUMMARY: A relatively calm-looking 35-year-old female patient presented with a 2-year history of dysphagia. She showed little improvement with conventional swallowing treatments over the past 2 years. She was relatively compliant with in-hospital dysphagia therapy, but uncooperative with home exercise and medication. In particular, since she was resistant to drug treatment, we had to take a different approach than the treatment she had been receiving for the past 2 years. After much deliberation, we decided to initiate antidepressant rTMS treatment with her consent (IRB No. 2023-05-021). Antidepressant rTMS treatment was performed twice weekly for a total of 20 sessions over 10 wk. The results showed improvement in subjective symptoms and video fluoroscopic swallowing study findings. To the best of our knowledge, this is the first report of symptomatic improvement using antidepressant rTMS protocol for refractory psychogenic dysphagia. CONCLUSION: This case demonstrates that rTMS with antidepressant protocol can be used to improve swallowing in patients with refractory psychogenic dysphagia.

Regulation of Flowering Time and Other Developmental Plasticities by 3' Splicing Factor-Mediated Alternative Splicing in Arabidopsis thaliana.

Plants, as sessile organisms, show a high degree of plasticity in their growth and development and have various strategies to cope with these alterations under continuously changing environments and unfavorable stress conditions. In particular, the floral transition from the vegetative and reproductive phases in the shoot apical meristem (SAM) is one of the most important developmental changes in plants. In addition, meristem regions, such as the SAM and root apical meristem (RAM), which continually generate new lateral organs throughout the plant life cycle, are important sites for developmental plasticity. Recent findings have shown that the prevailing type of alternative splicing (AS) in plants is intron retention (IR) unlike in animals; thus, AS is an important regulatory mechanism conferring plasticity for plant growth and development under various environmental conditions. Although eukaryotes exhibit some similarities in the composition and dynamics of their splicing machinery, plants have differences in the 3' splicing characteristics governing AS. Here, we summarize recent findings on the roles of 3' splicing factors and their interacting partners in regulating the flowering time and other developmental plasticities in Arabidopsis thaliana.

Aqueous-Phase Formation of Two-Dimensional PbI2 Nanoplates for High-Performance Self-Powered Photodetectors.

The process of the aqueous synthesis of nanomaterials has gained considerable interest due to its ability to eliminate the need for complex organic solvents, which aligns with the principles of green chemistry. Fabricating nanostructures in aqueous solutions has gained recognition for its potential to develop ultrasensitive, low-energy, and ultrafast optoelectronic devices. This study focuses on synthesizing lead iodide (PbI2) nanoplates (NPs) using a water-based solution technique and fabricating a planar photodetector. The planar photodetectors (ITO/PbI2 NPs/Au) demonstrated a remarkable photosensitivity of 3.9 × 103 and photoresponsivity of 0.51 mA/W at a wavelength of 405 nm. Further, we have carried-out analytical calculations for key performance parameters including open-circuit voltage (Voc), short-circuit current (Isc), on-off ratio, responsivity (R), and specific detectivity (D*) at zero applied bias, while photodetector operating in self-powered mode. These values are as follows: Voc = 0.103 V, Isc = 1.93 × 10-8, on-off ratio = 103, R = 4.0 mA/W, and D* = 3.3 × 1011 Jones. Particularly, the asymmetrical output properties of ITO/PbI2 NPs/Au detector provided additional evidence of the effective creation of a Schottky contact. Therefore, the photodetector exhibited a photo-response even at 0 V bias (rise/decay time ~1 s), leading to the realization of self-powered photodetectors. Additionally, the device exhibited a rapid photo-response of 0.23/0.38 s (-5 V) in the visible range. This study expands the scope of aqueous-phase synthesis of PbI2 nanostructures, enabling the large-area fabrication of high-performance photodetectors.

Triptycene-Fused Sterically Shielded Multi-Resonance TADF Emitter Enables High-Efficiency Deep Blue OLEDs with Reduced Dexter Energy Transfer.

Designing multi-resonance (MR) emitters that can simultaneously achieve narrowband emission and suppressed intermolecular interactions is challenging for realizing high color purity and stable blue organic light-emitting diodes (OLEDs). Herein, a sterically shielded yet extremely rigid emitter based on a triptycene-fused B,N core (Tp-DABNA) is proposed to address the issue. Tp-DABNA exhibits intense deep blue emissions with a narrow full width at half maximum (FWHM) and a high horizontal transition dipole ratio, superior to the well-known bulky emitter, t-DABNA. The rigid MR skeleton of Tp-DABNA suppresses structural relaxation in the excited state, with reduced contributions from the medium- and high-frequency vibrational modes to spectral broadening. The hyperfluorescence (HF) film composed of a sensitizer and Tp-DABNA shows reduced Dexter energy transfer compared to those of t-DABNA and DABNA-1. Notably, deep blue TADF-OLEDs with the Tp-DABNA emitter display higher external quantum efficiencies (EQEmax =24.8 %) and narrower FWHMs (≤26 nm) than t-DABNA-based OLEDs (EQEmax =19.8 %). The HF-OLEDs based on the Tp-DABNA emitter further demonstrate improved performance with an EQEmax of 28.7 % and mitigated efficiency roll-offs.

The role of NF-κB in breast cancer initiation, growth, metastasis, and resistance to chemotherapy.

Breast cancer (BC) is the second most fatal disease and is the prime cause of cancer allied female deaths. BC is caused by aberrant tumor suppressor genes and oncogenes regulated by transcription factors (TFs) like NF-κB. NF-κB is a pro-inflammatory TF that crucially alters the expressions of various genes associated with inflammation, cell progression, metastasis, and apoptosis and modulates a network of genes that underlie tumorigenesis. Herein, we focus on NF-κB signaling pathways, its regulators, and the rationale for targeting NF-κB. This review also includes TFs that maintain NF-κB crosstalk and their roles in promoting angiogenesis and metastasis. In addition, we discuss the importance of combination therapies, resistance to treatment, and potential novel therapeutic strategies including nanomedicine that targets NF-κB.

Shared decision-making intervention regarding dialysis modality in patients with CKD stage 5.

BACKGROUND: Patients with kidney failure must make complicated decisions about the dialysis modalities used either at home or in-hospital. Different options have varying levels of impact on patients' physical and psychological conditions and their social life. The purpose of this study was to evaluate the implementation of an intervention designed to achieve shared decision making (SDM) in patients' options for dialysis. METHODS: SDM was performed after consent was written for stage 5 chronic kidney disease patients before dialysis, and 435 cases were performed in 408 patients from December 16, 2019 to June 30, 2021. Among these, 101 patients were compared by SDM measurement scale, patient satisfaction, disease recognition scale survey, and dialysis method. RESULTS: The average age of participants was 56 years, with a gender composition of 55 males (54.5%) and 46 females (45.5%). Following SDM, the final dialysis methods decided upon by patients and clinicians were peritoneal dialysis (67 patients, 66.3%), hemodialysis (22 patients, 21.8%), and kidney transplantation (1 patient, 1.0%). CONCLUSIONS: Among participating patients, SDM was effective when used to decide on dialysis treatment, and patients were satisfied with the dialysis method decision process. On the disease awareness scale, those who participated in this project had relatively high positive and low negative perceptions, so it can be concluded that SDM was relatively effective. The implementation of SDM was helpful in selecting patients' best dialysis methods, and SDM scale results were higher in the peritoneal dialysis group than in the hemodialysis group.

Two Arabidopsis Splicing Factors, U2AF65a and U2AF65b, Differentially Control Flowering Time by Modulating the Expression or Alternative Splicing of a Subset of FLC Upstream Regulators.

We investigated the transcriptomic changes in the shoot apices during floral transition in Arabidopsis mutants of two closely related splicing factors: AtU2AF65a (atu2af65a) and AtU2AF65b (atu2af65b). The atu2af65a mutants exhibited delayed flowering, while the atu2af65b mutants showed accelerated flowering. The underlying gene regulatory mechanism of these phenotypes was unclear. We performed RNA-seq analysis using shoot apices instead of whole seedlings and found that the atu2af65a mutants had more differentially expressed genes than the atu2af65b mutants when they were compared to wild type. The only flowering time gene that was significantly up- or down-regulated by more than two-fold in the mutants were FLOWERING LOCUS C (FLC), a major floral repressor. We also examined the expression and alternative splicing (AS) patterns of several FLC upstream regulators, such as COOLAIR, EDM2, FRIGIDA, and PP2A-b'ɤ, and found that those of COOLAIR, EDM2, and PP2A-b'ɤ were altered in the mutants. Furthermore, we demonstrated that AtU2AF65a and AtU2AF65b genes partially influenced FLC expression by analyzing these mutants in the flc-3 mutant background. Our findings indicate that AtU2AF65a and AtU2AF65b splicing factors modulate FLC expression by affecting the expression or AS patterns of a subset of FLC upstream regulators in the shoot apex, leading to different flowering phenotypes.

YCl3-Substituted CsPbI3 Perovskite Nanorods for Efficient Red-Light-Emitting Diodes.

Cesium lead iodide (CsPbI3) perovskite nanocrystals (NCs) are a promising material for red-light-emitting diodes (LEDs) due to their excellent color purity and high luminous efficiency. However, small-sized CsPbI3 colloidal NCs, such as nanocubes, used in LEDs suffer from confinement effects, negatively impacting their photoluminescence quantum yield (PLQY) and overall efficiency. Here, we introduced YCl3 into the CsPbI3 perovskite, which formed anisotropic, one-dimensional (1D) nanorods. This was achieved by taking advantage of the difference in bond energies among iodide and chloride ions, which caused YCl3 to promote the anisotropic growth of CsPbI3 NCs. The addition of YCl3 significantly improved the PLQY by passivating nonradiative recombination rates. The resulting YCl3-substituted CsPbI3 nanorods were applied to the emissive layer in LEDs, and we achieved an external quantum efficiency of ~3.16%, which is 1.86-fold higher than the pristine CsPbI3 NCs (1.69%) based LED. Notably, the ratio of horizontal transition dipole moments (TDMs) in the anisotropic YCl3:CsPbI3 nanorods was found to be 75%, which is higher than the isotropically-oriented TDMs in CsPbI3 nanocrystals (67%). This increased the TDM ratio and led to higher light outcoupling efficiency in nanorod-based LEDs. Overall, the results suggest that YCl3-substituted CsPbI3 nanorods could be promising for achieving high-performance perovskite LEDs.

Impact of π-Expanded Boron-Carbonyl Hybrid Acceptors on TADF Properties: Controlling Local Triplet Excited States and Unusual Emission Tuning.

Three donor-acceptor-type thermally activated delayed fluorescence (TADF) emitters (PXZBAO (1), PXZBTO (2), and PXZBPO (3)) comprising a phenoxazine (PXZ) donor and differently π-expanded boron-carbonyl (BCO) hybrid acceptor units are proposed. The emitters exhibit red (1) to orange (3) emissions with an increase in the π-expansion in the BCO acceptors. The control of the strength of local aromaticity for the BCO unit and the corresponding LUMO level is attributed to inducing the unusual emission color shifts. The photoluminescence quantum yield and delayed fluorescence lifetime of the emitters are also adjusted by the π-expansion. Notably, although 1 possesses a 3nπ* state in the acceptor unit as a local triplet excited state (3LE, T2), the T2 states of 2 and 3 mainly comprise a 3ππ* state in the acceptor. Consequently, all of the emitters exhibit strong spin-orbit coupling between their T2 and excited singlet (S1) states, leading to a fast reverse intersystem crossing with rate constants of ∼106 s-1. By employing the emitters as dopants, we realize efficient red-to-orange TADF-OLEDs. Maximum external quantum efficiencies of 17.7% for the yellowish-orange (3), 15.5% for the orange (2), and 13.9% for the red (1) devices are achieved, and the values are very close to the theoretical limit predicted from the optical simulation.

Carbohydrate antigen 19-9 plus carcinoembryonic antigen for prognosis in colorectal cancer: An observational study.

AIM: Carcinoembryonic antigen (CEA) is a primary prognostic marker and can detect colorectal cancer (CRC) recurrence; however, it has low sensitivity. Carbohydrate antigen 19-9 (CA 19-9) can be used as a supplemental tumour marker along with CEA. The purpose of this study was to determine whether preoperative CA 19-9 added to CEA helped predict long-term prognosis and whether follow-up CA 19-9 added to CEA had additional benefits in diagnosing the recurrence of CRC. METHOD: We retrospectively assessed patients who underwent surgery for primary CRC between January 2004 and December 2015 at Seoul National University Hospital. Data on demographics, preoperative and follow-up CEA and CA 19-9 levels, recurrence and survival were obtained and analysed with respect to tumour marker levels to ascertain their prognostic and diagnostic values. RESULTS: A total of 4972 and 1530 patients were included to analyse preoperative and follow-up tumour marker levels, respectively. The 5-year relapse-free survival rates were 72.2% ± 0.8%, 52.5% ± 2.2%, 55.5% ± 3.2% and 32.1% ± 2.3% in the normal CEA and CA 19-9, high CEA, high CA 19-9, and high CEA and high CA 19-9 groups, respectively (all P < 0.001). Patients whose elevated CEA or CA 19-9 levels reduced to normal levels had better survival outcomes than those with postoperatively elevated levels. Elevated follow-up CA 19-9 and CEA levels were related to higher incidences of distant metastasis (CA 19-9, 14.0% vs. 23.1%, P = 0.004; CEA, 12.6% vs. 30.1%, P < 0.001) but not to local recurrence. Combined follow-up CEA and CA 19-9 increased the sensitivity for recurrence to 31.4%, with a 5% difference from the sensitivity of CEA alone. In the subgroup with high preoperative CA 19-9 levels, sensitivity increased by 18.2% overall. CONCLUSION: CA 19-9 is a valuable prognostic and diagnostic marker for CRC when used adjunctively with CEA and can be a supplementary marker with CEA to improve sensitivity, especially with elevated preoperative CA 19-9.

Self-Powered Fine Dust Filtration Using Triboelectrification-Induced Electric Field.

Particulate matter (PM) in the environment can adversely affect the health of living things. However, high removal efficiency and low-pressure loss are crucial design challenges for any air filtration system. To circumvent the challenge, here, we demonstrate a novel triboelectric (TE) air filtration system that is based on a rotation-type triboelectric nanogenerator (TENG) and a filter comprising two sets of plates: primary and secondary, that are placed in the airflow channel. When the TENG charges the two plate sets with opposite charges, the flowing air particles are charged at the primary plates and are collected, due to an electric field, at the secondary plates. The TE filter has demonstrated a PM2.5 removal efficiency of ~ 99.97% for the fine dust particles, and it remains stable even after several washing cycles. The pressure loss is almost two orders less than the high-efficiency particulate air filter. Since the airflow itself can drive the TENG, the TE filter can potentially be integrated with any air conditioning system for fine dust filtration in offices, automobiles, etc.

Reduced Expression of PRX2/ATPRX1, PRX8, PRX35, and PRX73 Affects Cell Elongation, Vegetative Growth, and Vasculature Structures in Arabidopsis thaliana.

Class III peroxidases (PRXs) are involved in a broad spectrum of physiological and developmental processes throughout the life cycle of plants. However, the specific function of each PRX member in the family remains largely unknown. In this study, we selected four class III peroxidase genes (PRX2/ATPRX1, PRX8, PRX35, and PRX73) from a previous genome-wide transcriptome analysis, and performed phenotypic and morphological analyses, including histochemical staining, in PRX2RNAi, PRX8RNAi, PRX35RNAi, and PRX73RNAi plants. The reduced mRNA levels of corresponding PRX genes in PRX2RNAi, PRX8RNAi, PRX35RNAi, and PRX73RNAi seedlings resulted in elongated hypocotyls and roots, and slightly faster vegetative growth. To investigate internal structural changes in the vasculature, we performed histochemical staining, which revealed alterations in cell wall structures in the main vasculature of hypocotyls, stems, and roots of each PRXRNAi plant compared to wild-type (Col-0) plants. Furthermore, we found that PRX35RNAi plants displayed the decrease in the cell wall in vascular regions, which are involved in downregulation of lignin biosynthesis and biosynthesis-regulated genes' expression. Taken together, these results indicated that the reduced expression levels of PRX2/ATPRX1, PRX8, PRX35, and PRX73 affected hypocotyl and root elongation, vegetative growth, and the vasculature structures in hypocotyl, stem, and root tissues, suggesting that the four class III PRX genes play roles in plant developmental processes.

Profiling Cannabinoid Contents and Expression Levels of Corresponding Biosynthetic Genes in Commercial Cannabis (Cannabis sativa L.) Cultivars.

Cannabis (Cannabis sativa L.) is widely cultivated and studied for its psychoactive and medicinal properties. As the major cannabinoids are present in acidic forms in Cannabis plants, non-enzymatic processes, such as decarboxylation, are crucial for their conversion to neutral active cannabinoid forms. Herein, we detected the levels of cannabidivarin (CBDV), cannabidiol (CBD), cannabichromene (CBC), and Δ9-tetrahydrocannabinol (Δ9-THC) in the leaves and vegetative shoots of five commercial Cannabis cultivars using a combination of relatively simple extraction, decarboxylation, and high-performance liquid chromatography analyses. The CBDV, CBC, and Δ9-THC levels were 6.3-114.9, 34.4-187.2, and 57.6-407.4 µg/g, respectively, and the CBD levels were the highest, ranging between 1.2-8.9 µg/g in leaf and vegetative shoot tissues of Cannabis cultivars. Additionally, correlations were observed between cannabinoid accumulation and transcription levels of genes encoding key enzymes for cannabinoid biosynthesis, including CsCBGAS, CsCBDAS, CsCBCAS, and CsTHCAS. These data suggest that the high accumulation of cannabinoids, such as CBC, Δ9-THC, and CBD, might be derived from the transcriptional regulation of CsCBGAS and CsCBDAS in Cannabis plants.